Ce constructeur 3D est la preuve que l'ingénierie et l'esthétique peuvent se combiner pour créer des objets de décoration étonnants. Et il est fait à la main ! Assemblez-la étape par étape et créez une élégante lampe en forme de fleur qui ajoutera un sentiment de paix et d'harmonie à votre intérieur. Le véritable charme vient de la mécanique : les pétales peuvent s'ouvrir et les bandes de LED peuvent émettre une lumière blanche brillante ou une douce lueur jaune. Construisez-la et choisissez comment votre Fleur ardente brillera !
Some cool facts about the Fleur ardente
Ce modèle 3D parle de lui-même en termes de beauté, mais ses caractéristiques techniques sont tout aussi impressionnantes. Vous devrez assembler 246 pièces en bois pour réaliser le projet. La lanterne se compose de deux parties : la fleur elle-même, qui se déploie avec 12 pétales (6 grands et 6 petits), et le support qui abrite les commandes. Sur le panneau de commande doté de boutons On/Off, vous pouvez activer la lumière et choisir entre les modes blanc et jaune. La rotation de la partie centrale du support permet d'enclencher le mécanisme d'ouverture des pétales.
Une double dose de méditation : tout d'abord, fabriquer la Fleur ardente, puis la voir s'illuminer en pleine floraison…
Le Fleur ardente est un puzzle 3D en bois spécialisé conçu par WoodTrick. Cette élégante lanterne de bricolage comporte 246 pièces et peut être assemblée en 3 à 5 heures, offrant un niveau de difficulté modéré (niveau MASTERS, noté 3 sur 5). Elle constitue un défi agréable pour les assembleurs professionnels, mais les débutants pourront également l'achever sans problème, car un manuel clair et très détaillé est fourni dans le kit.
Ce modèle, qui fait partie de la série Electro, fonctionne avec des piles AA (les piles ne sont pas incluses dans le kit). Ces piles alimentent les bandes de LED, qui peuvent briller en deux modes : jaune chaud ou blanc brillant. Le compartiment à piles est situé à la base
du support de la fleur. De plus, le support et les pétales sont décorés de sculptures complexes, créant un design harmonieux et élégant.
La lampe 3D Fleur ardente est un accent fantastique pour tout intérieur et un cadeau original pour les amateurs de décoration d'intérieur. Son design floral élégant et son concept astucieux ne manqueront pas d'impressionner les amateurs d'esthétique. Ce modèle est fabriqué en bois naturel et ne nécessite aucune colle pour être assemblé, ce qui le rend tout à fait sûr pour votre santé et l'environnement. Vous apprécierez l'expérience tactile de la manipulation de chaque pièce de l'ensemble !
Chaque kit comprend un manuel imprimé. Mais si le vôtre est endommagé ou si vous préférez la version en ligne, vous pouvez télécharger le manuel pdf du modèle ici.
Generell ist die Fiery Bloom sehr schön anzuschauen.
Das flackernde sowie das weiße Licht,sind wie bei der Antique Lantern. Das öffnen und schließen der Blüte funktioniert einwandfrei. Das Handbuch ist wie immer sehr hilfreich, könnte aber mehr detaillierte Ansichten haben.
Die Kabel der elektronischen Verbindung sollten länger sein (5mm) etwa,das macht die Handhabung wesentlich einfacher. Alles in allem hat sich der Kauf gelohnt
Es hat großen Spass gemacht die Feuerblume zu bauen . Man sollte allerdings die nötige Sorgfalt beim zusammenbauen walten lassen. Die Bauanleitung genau beachten und ein bischen Fingerfertigkeit ist schon nötig. Es ist schön wenn dann alles funktioniert.
The design of the flower is beautiful. I love the fact that there are two light effects.
I started making this kit with full confidence, however during the assembly I notised a few items that were not cut properly, so making it fit required some shaving off the wood. There were a few items that did not stated in the manual to have some of the parrafine wax on it, which are crucial for the mechanical bit. (Oh yeah btw theres no electrical motor in it, in the description said it was). Nearer the end a few items broke off during assembly and there is not enough spares for it. When it was finished I tried turning it it went fine for 2 or 3 times having clicking 3x left and 3x right (leaves go up n down) but at the 4th attempt a loud cracking noise came from the turning bit and now the leaves arent going up n down anymore. I guess this was inevitable as I said there should have been more instructions in the manual about waxing the mechanical bit parts. The light still works so I just use a little piece of wood to keep my leaves open or closed since that broke. Overal a lovely kit.
Bellissimo, merita un posto sulla scrivania o su un mobile. Secondo me merita un livello di difficoltà in più del 3°. Se seguite attentamente le istruzioni otterrete un oggetto che vi darà molta soddisfazione.
Je prends un grand plaisir à réaliser cette lampe, j’ai hâte de la terminer, les pièces se découpent facilement, l’assemblage est un peu plus compliqué et j’aurai aimé plus d’explications détaillées pour les passages difficiles, heureusement il y a la vidéo qui peut aider en cas de doute.
Teile sehr schwer ineinander zu stecken. Passform teilweise nicht gepasst. Teile sind kaputt gegangen. Das ganze Bauset ist in den Müll gewandert, nachdem mir 3 Teile kaputt gegangen sind beim zusammenbauen. Was ein Schrott. Schade ums Geld .
I have already rated this build, and sent a short video.
I also gave a few comments as to potential amendments to some parts, and these were acknowledged.
I liked the product; the puzzle is a bit challenging, as intended, and the final result is very nice. Unfortunately, I tore one of the delicate leaves while finishing it.
Bought and assembled it for my mother for mother's day, and she really liked it. It's beautiful, not too difficult to put together and it works like a charm.
Very good model to build but you must double check each part at every stage, I found my on a few occasions having to carefully take a part off again to reposition. I am still building this so haven’t started on the leaves yet, they will be so fragile that it will be impossible to reposition them without damaging them if you have to undo a joint. There are a couple of things that could be improved in the instructions, I found several stages where there are moving parts that don’t call for the part to be waxed so I did them to be on the safe side, I also think that they really should suggest that you test the led’s once they are plugged into the circuit board, I did and found that they would switch on but not off again, at that stage you can still see the microswitch mechanism and I just had to tweak the part that pushes on the switch, that resolved the problem, something that would be impossible once the switch had been covered up. Overall I am very pleased with the build quality and know it’s going to look fantastic when it is done, my biggest advice would be to take your time, do it in stages, something I do with all my models rather than try to build it completely in one go
I studied transport and technology at university and I’ve always had a passion for engineering. And I gladly joined the WoodTrick team because here I can do all these cool things. I love to create! I believe that nothing is impossible if you have skills and a good imagination. I love everything we do, but especially the car designs. My favorite models are Monster track and Rover. Try them!
Added products
Your form has been successfully submitted. We will contact you soon.